Version 160624
Page 39
Adding Auditoriums
Click the “Auditoriums” button. The Add
Auditorium dialog box will appear.
Click “Add” to add an auditorium.
The name of the auditorium can be changed as
desired. A suggested auditorium name is 123-12
where 123 is the theater number and 12 is the
screen number. When multiple auditoriums are
listed along the GUI title bar, this name will be
used. Use of theater number - auditorium number
makes it easy to identify which auditorium is which
Select the group from the previously defined list of
groups.
Click “Change” under Communications Settings to set the IP address of the JSD-100MA in this
auditorium.
Select the IP address of the JSD-100MA from the auto-detected device list if it is present. If not, press
“Manual Add” and then key in the IP address of the JSD-100MA in this auditorium.
Press “OK” to exit Comm Settings and OK to exit Auditoriums.
Once groups and auditoriums are defined, the GUI shows a summary view of each JSD-100MA on the network.
The summary view includes the selected format, the fader level, and communications settings. Clicking on the
summary view box brings up the detailed view of that particular JSD-100MA where all controls are available.
8.3.2 JSD-100MA Web Interface
The JSD-100MA includes a web server. The web server can be used to view the current status of the JSD-
100MA, view the JSD-100MA log, and upload new firmware.
The Status Page shows the current fader level, the current format, and a bar graph showing the audio output
levels, auditorium information and network information. It also has buttons to select input format, adjust
fader level, and mute or un-mute the system.
The Log Page shows the JSD-100MA system log. A portion of a typical log page is shown below. Note that
three time zones are listed: UTC Time, GUI Time, and XSP Time. XSP Time and GUI time make adjustments for
daylight saving time based on whether daylight saving time is currently in effect at the GUI location. Since the
observation of daylight saving time varies, there is no guarantee that this setting will also be correct at the JSD-
100MA location. Clicking the time zone abbreviation at the top of the XSP time column will reload the log page
toggling whether daylight saving time is used in the XSP time column. Click this as necessary for proper display
of the time at the JSD-100MA.
The Configuration Page shows the same auditorium data and network data as the status page. When first
accessing the configuration page, you will be asked for a username and password. The username is admin.
The default password is ultra. To change the password, enter it twice at the bottom of the configuration page,
then press the “Save New Password” button. The Configuration Page has a link to the Update Firmware page.