US Utah-400, Setup And Operation, Page: 99 / 157

144x144 Router
4-33
Deluxe Output Board
Board Indicators
There are two indicators per channel; green to indicate signal presence, and red to indicate
any defect in the signal. A defect typically exists when certain signal formats are non-standard.
FIGURE 4-29.
Deluxe Audio Output Card
The Deluxe output card contains a Power Ok indication, and a Program Done indication.
The SGACT (Scangate Active) LED indicates a successful communication between the host
processor on the crosspoint board and the actual output board. The Program Done and Power
LEDs should be on, while the Scangate Active LED flashes continuously.
The Deluxe Output board mates up with the same I/O adaptors as the standard card, allowing
the mixing of different balanced or unbalanced cards within the same chassis.
Signal Presence Indicators
2 Per Channel
(Red = Error)
(Green = Valid)
Power Good LED
Scangate Active
Program Done