US Utah-400, Setup And Operation, Page: 4 / 157

iv
MC-400
Important Safeguards and Notices
This section provides important safety guidelines for the Operator and Service Personnel. Spe-
cific warnings and cautions are found throughout the guide where they apply, but may not
appear here. Please read and follow the important safety information, specifically those
instructions related to risk of fire, electric shock, or injury to persons.
Safety Symbols
•
Hazardous Voltage symbol
•
Caution symbol. The product is marked with this symbol when it is nec-
essary to refer to the manual to prevent damage to the product.
Warnings
Please observe the following important warnings:
•
Any instructions in this guide that require opening the chassis, changing
a power supply, or removing a board, should be performed by qualified
personnel only. To reduce the risk of electric shock, do not perform any
service unless you are qualified to do so.
•
Heed all warnings on the unit and in the operating instructions.
•
Do not use this product in or near water. Disconnect AC power before
installing any options or servicing the unit unless instructed to do so by
this manual.
•
This product is grounded through the power cord ground conductor. To
avoid electric shock, plug the power cord into a properly wired recepta-
cle before connecting the product inputs or outputs.
•
Route power cords and other cables so they won’t be damaged.
•
The AC receptacle (socket) should be located near the equipment and
be easily accessible.
•
Disconnect power before cleaning. Do not use any liquid or aerosol
cleaner - use only a damp cloth.