US Utah-400, Setup And Operation, Page: 2 / 157

ii
MC-400
The Utah-400/144x144 Digital Routing Switcher Operators'
Manual
•
Document Number: 82101-0070
•
Document Version: 2.1.2
•
Date: July 1, 2010
•
Printed in U.S.A.
Copyrights and Trademarks
© 2010 Utah Scientific, Inc., All rights reserved. Any use or reproduction of this guide’s con-
tents without the prior written consent of Utah Scientific, Inc. is strictly prohibited.
Utah-400 is a trademark of Utah Scientific, Inc.
Windows, Windows 2000 and Windows NT are registered trademarks of Microsoft Corpora-
tion.
All other product names and any registered or unregistered trademarks mentioned in this
guide are used for identification purposes only and remain the exclusive property of their
respective owners.
Notice
Information contained in this guide is subject to change without notice or obligation. While
every effort has been made to ensure that the information is accurate as of the publication
date, Utah Scientific, Inc. assumes no liability for errors or omissions. In addition, Utah Scien-
tific, Inc. assumes no responsibility for damages resulting from the use of this guide.
FCC Compliance (USA) and Digital Equipment Compliance (Canada)
This equipment has been tested and found to comply with the limits for a Class A, digital
device, pursuant to Part 15, Subpart B of the FCC Rules and the Canadian EMC Requirement
(ICES-003). These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case, the user will be required to correct the interference at their own expense.
Shielded cables must be used to ensure compliance with the FCC Class A limits.