70
DS1375-020E
Parameter
Values
Description
Default
destination
public
number /
extension
Target of the call if selections are not active. It can be a telephone number
(extension or public network) or a name of a queue (if the ACD function is active
and configured).
You can specify a series of destinations separated by semicolons: the answering
machine will make the calls in sequence using the no answer timeout indicated
in “No Answer Timeout”. At the end of the list, you can enter the “rp” command
to make the answering machine start again from the first destination indicated
in the list in case the call is not answered. If there is no such command, the call
will be hung up.
Silence Before
the Welcome
message
time
(seconds) It waits for a number of seconds before playing the welcome music.
Interruptible
message
status
(enabled/
disabled)
It activates the target selection function by the caller. It is possible to perform
selections by pressing a number (Configured in the Selections section).
No. of Welcome
Message
Repetitions
number Number of repetitions of the welcome message in case of error: wrong selection
or no selection.
DISA
status
(enabled/
disabled)
It enables or disables the function that allows a caller to directly contact
an extension if he/she knows its number. With the
No DISA Destinations
parameter, you can forward your direct call to destinations
No Disa
Destinations
public
number /
extension
The column on the left indicates the extension to be filtered, while the column
on the right indicates the new destination.
Destination
Without Selection
public
number /
extension
Call destination in case the selections are active, but nothing is selected.
You can specify a series of destinations separated by semicolons: the answering
machine will make the calls in sequence using the no answer timeout indicated
in “No Answer Timeout”. At the end of the list, you can enter the “rp” command
to make the answering machine start again from the first destination indicated
in the list in case the call is not answered. If there is no such command, the call
will be hung up.
Wrong selection
message
file (without
extension)
Name of the file played in case of wrong selection by the user (in case of
configured selections)
Selection Dialling
Timeout
status
(enabled/
disabled)
Time between digits during the dialling of DTMF digits by the user.
Selections
destination
The desired DTMF digit is indicated in the left column, while the right column
indicates the destination.
You can specify a series of destinations separated by semicolons: the answering
machine will make the calls in sequence using the no answer timeout indicated
in “No Answer Timeout”. At the end of the list, you can indicate two commands:
• “rp”: to make the answering machine start again from the first destination
indicated in the list in case the call is not answered.
• “stop”: to make the answering machine hang up the call if it is not answered.
If no command is present, the answering machine will perform the action
indicated in “Default Destination”.
Management of
Closed
status
(enabled/
disabled)
Check if the default profile is active.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
