56
DS1375-020E
The following parameters explain the different rights granted to any type of user.
• Operator: this section allows activating the Operator Station page in the myTalk web interface for the
user. (see relevant section of the manual).
• Pick group: Identification of the belonging group of the extension for the function “answer for unavailable
person”, i.e. the function that allows one person of the same group to answer the call for an extension
belonging to that group.
The call is picked up by dialling the *35# code (or through the dedicated function key of Urmet U.TAlk
telephones) while a telephone of the relevant pick group is ringing.
• Music on hold: it allows selecting the waiting message to play if the call is put on hold; the selection can
be made by selecting one of the available messages; any integration can be made through the page for
the definition of System main parameters.
• Forbid Outbound: by activating this setting, the extension can make calls only to system extensions; the
setting is disabled by default.
• Forbid International: by activating this setting, the extension will NOT be able to call international
destinations, i.e. with international prefix other than that set in the system definition parameters; the
setting is enabled by default.
• Forbid with Prefix: with these three parameters it is possible to define customised prefixes, which - if
enabled - will inhibit the calls made from the extension to destinations that have prefixes that match those
indicated.
• Default trunk: this parameter allows associating the extension with the line trunk that the extension will
use by default for outbound calls; this parameter can be customised according to the division of the lines
managed by the system.
• Waiting calls: it allows activating on the extension the possibility to manage a second call even if already
engaged in a conversation with a previous call. For any extension it is possible to put on hold up to three calls.
In this case:
- the extension with the active function will be able to hear during the call a tone that notifies the
presence of a second call;
- the calling person of the second call, the one on hold, will hear a ringing tone indicating that the calling
destination is not busy.
• My Talks: it allows enabling the user web interface for the extension. The user interface is disabled by
default.
• CAM: it allows you to associate a camera in the system to display its video.
11.17 REAL-TIME CONSULTATION OF THE STATE OF SYSTEM’S LINES AND EXTENSIONS
The
Extensions and Lines Status
section shows all the extensions present in the iPerTAlk system with their state
(
your own extension in
light blue
; free extension in
green
; ringing extension in
yellow
; busy extension or extension
engaged in conversation in
red
,
blue
if Do not disturb function is active and
grey
if extension is not active / cannot
be reached).
The
Lines
section indicates the available lines with the number of set channels.
Next to the line trunk name there is the number of total channels (e.g. 4) and the number of busy channels in real
time.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
