manualshive.com logo in svg

urmet domus iPerTAlk 1375, Installation And Configuration Manual

Share
Download
urmet domus iPerTAlk 1375 Installation And Configuration Manual Download Page 44

44

DS1375-020E

For each camera, the available Streaming Profiles and video streaming information are also listed automatically.

 

‹ Name (streaming profile):

 

  For Urmet cameras, 3 profiles are available:

–  MainStream

–  SubStream

–  MobileStream

 

‹

RTSP link:

 link of the camera used for the streaming.

 

‹

Codec:

 type of video codec configured.

ATTENTION!

 You can ONLY view streaming in H.264 format.

 

‹ Resolution: it displays the video resolution of the streaming.

ATTENTION!

   The maximum supported video resolution is 1280x720. If a video door phone Ref. 1375/825 

is installed in the system, the maximum video resolution supported is 640x480.

 

‹

Credentials: 

in these text fields you can indicate the authentication credentials configured in the camera, 

which are necessary for viewing the video streaming (if no authentication credentials are available, leave 

the fields empty).

 

For Urmet cameras, the default credentials are:

 

- User: admin

 

- Password: admin

 

‹

Actions/Status:

 the configuration status of each video streaming is shown.

ATTENTION!

   The  system  will  report  the  status  “NOT  COMPATIBLE”  for  all  the  video  streaming  with 

unsuitable characteristics.

4.  Before acquiring the video streaming by pressing the key 

 you must configure the parameters for 

camera streaming.

5.  Using the “Internet Explorer” browser, enter the camera IP address (the camera IP address can be found 

under  “Remote Setting”  in  the  menu  Multimedia 

→

  Video Surveillance)  to  access  the  configuration  web 

interface.

6.  Select the menu Network 

→ 

Video Streaming.

7.  Select the streaming profile you want to configure: Main Stream, Sub Stream or Mobile Stream.

 

It is recommended to use the SubStream profile so as not to vary the resolution levels of profiles used for 

other purposes.

8.  Set the desired resolution in the “

Resolution

” parameter.

ATTENTION!

  The maximum supported video resolution is 1280x720. If a video door phone Ref. 1375/825 

is installed in the system, the maximum video resolution supported is 640x480.

Summary of Contents for iPerTAlk 1375





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands