62
DS1375-020E
Press the button “Save” to create the new gateway.
You can only configure one trunk per type, i.e. after configuring an IperCom trunk, it will no longer be
visible/selectable in the drop-down menu on the page to create a new trunk (the same applies to the
Urmet Cloud trunk).
11.21.2 SIMULTANEOUS CALLS ON IPERCOM TRUNKS
You can make multiple simultaneous calls between IperCom and IperTalk. This simultaneity can be configured in
the IperCom trunk configuration page (System
→
Advanced Configurations
→
Lines
→
Select IperCom trunk).
Through the configuration page it will be possible to increase the number of available channels to increase the
number of simultaneous calls. The maximum number of simultaneous calls is equal to the number of licences for
SIP Junction Channel Ref. 1375/20x
available on the system.
ATTENTION!
The number of simultaneous calls to be set must take into account the number of relevant
Switchboards on the Ipercom system.
11.21.3 CREATING AN INBOUND ROUTING RULE
It is necessary to provide for the creation of one or more routing rules in order to define how the destinations of
calls from IperCom devices should be handled. For details on how to create an inbound rule, please refer to the
relevant paragraph “
12.1 Inbound routing
”. Below are a number of examples:
EXAMPLE 1: Direct IperCom calls every day and at all times to a specific extension 90312.
EXAMPLE 2: Direct IperCom calls every day and at all times to the destination previously configured in IperCom
(see details in the relevant manual) which, however, will have to coincide with an extension present and configured
in iPerTAlk.
EXAMPLE 3: The destination of IperCom calls is differentiated according to the selected time frame. Every day
from 00:00:00 to 12:59:59 to extension 90100, Every day from 13:00:00 to 23:59:59 to extension 90300.
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
