digiset
5
Urma AG, Switzerland www.urma.ch
page 22
5.2 Status field
5.2.1 Status and system information
Display
Description
Upper toolbar for selecting important operating modes directly
and quickly using tool buttons.
Current operating mode display (status).
Measuring program results display (e.g. line).
Selected measuring method display e.g. M3: PX.
One of the possible measuring methods can be selected after
the contour analysis by clicking on the icon.
Tool icon with the identity number and name of the selected tool
shown in clear text.
The stored tools can be displayed directly by clicking on the tool
icon.
Tool reference symbol with tool reference number and the name
of the tool reference in clear text.
The tool references created can be displayed directly by clicking
on the tool reference icon.
Mm
Display of the selected measuring unit (mm/inch)
You can switch to the other measuring unit by clicking on the
display.
Display of the X and Z readings in absolute display mode if a
counter module is connected.
The hold function for the corresponding axis can be switched on
by clicking on the display fields.
