digiset
5
Urma AG, Switzerland www.urma.ch
page 10
4.1.2 Assembling and setup of Digiset 5
1. Check the handwheel for the x-axes is dissassem-
bled.
2. Get a piece of wood or a similar, strong block (about
100x100x200mm / 4x4x8 in)
3. Carefully flip the Digiset as shown in Pic. 4
(make sure no parts get damaged)
4. Take the metal frame and put in the cable binder as
shown in Pic. 5 and 5a (it is difficult to put them in after
mounting the metal frame)
5. Assemble the metal frame to the Digiset 5 body as shown
in Pic. 6 and connect the blue and red cables.
Pic. 4
Pic. 5
Pic. 5a
Pic. 6
Blue and red cables
Assembling screw
Assembling screw
