digiset
5
Urma AG, Switzerland www.urma.ch
page 39
7.4 Post processor-measurement series (optional)
You access this operating mode using the following menu steps:
Main menu
Sub-menu 1
Sub-menu 2
System
Ö
PP-measurement series
Ö
New
Cancel
Interrupt
Continue
Output
Show list
7.4.1 New
This operating mode is used to create a measurement range which can be trans-
ferred as a controlled output format to a machine. Such a range of measurements
can consist of a maximum of 50 data records.
Procedure:
1. Under the "New" operating mode select the required output format from a list
of no more than five stored formats (post processor formats).
2. After selecting the desired output format, the corresponding input mask
opens. Enter the logarithm data here. This input mask doesn't have to ap-
pear in any case. It depends on the selected post processor.
3. In order to store the measured values for X and Z in a data record, click on
the print symbol in the status window.
4. A further input mask opens in which the measured values for X and Z are al-
ready entered. Enter any additional PP specific parameters here.
5. Only then can the data record be stored and the measured values printed.
Only one measurement range can be stored.
7.4.2 Cancel
The PP measurement range is cancelled. All data records which have been stored so
far in the measurement range are deleted.
)
