digiset
5
Urma AG, Switzerland www.urma.ch
page 7
2 Safety instructions
2.1 General safety instructions
The following instructions must be carefully observed before installing and commis-
sioning the TCAM2 imaging components, CMOS camera and light and if necessary
the counter module.
1. Imaging components may only be installed by specially trained person-
nel.
2. Use the optional power pack adapted for the components’ connection
data to supply power to the equipment.
3. The guarantee does not cover any damage to the imaging components
caused by using your own power supply.
4. The TCAM2 must be connected last in order to protect system compo-
nents from damage.
Keep this user manual carefully for later use and observe the following safety and
operating instructions.
1. Do not expose the Digiset 5 to direct sunlight.
2. Do not expose the Digiset 5 to excessive damp and do not pour fluids
over the equipment.
3. All maintenance work must only be carried out by authorized customer
service personnel.
