digiset
5
Urma AG, Switzerland www.urma.ch
page 14
3. If the greyscale lines are not horizontal you have to adjust the position of the
light to the optical axis. For this you unscrew the 3 slotted-head screws until
you can move the whole print. On the screen you will see what the move-
ment of the print will cause with the greyscale lines. You move the print until
all greyscale lines are horizontal.
Potentiometer
slotted head screws
4. If the greyscale lines are horizontal but not within the tolerance field, you can
increase or reduce the intensity of the light on turning the little screw on the
potentiometer.
5. Put back the cover and exit the illumination check with ESC or by selecting
another operating mode.
