digiset
5
Urma AG, Switzerland www.urma.ch
page 37
7.2.2.2 Delete tool
After selecting the "Delete" operating mode the corresponding tool must be selected
in the selection window.
There is an additional security query before the tool can be deleted after it is con-
firmed.
7.2.2.3 Change tool
After selecting the "Change" operating mode the corresponding tool must once more
be selected in the selection window.
After confirming that the correct tool has been selected, a window in which the chan-
ges can be made opens, just as it does when entering a new tool.
7.2.2.4 Show list of tools
After selecting the "Show list" operating mode, a window opens with a selection list of
the saved tools and the buttons explained below:
Select
The tool highlighted in the selection list will be loaded.
Change
The tool highlighted in the selection list can be changed.
Delete
The tool highlighted in the selection list is deleted after it has
been confirmed with the security query.
Print list
The tools will be printed giving the tool ID and tool name in
table form using the interface defined in the "Output format /
Measured value" menu item.
Close
The list of tools is closed.
