Uponor SYSTEMpro 311, Installation Manual

Page: 6 / 107

INTRODUCTION
NAVIGATING THE CONTROL
The SYSTEMpro 311 (also referred to as "control") has
a Liquid Crystal Display (LCD) that lets users setup the
operation of the system. The SYSTEMpro 311 has four
push buttons for selecting and adjusting settings.
( See fig. a)
NOTE: It is recommended that the user
record control settings (for later review) on the
Program Setup Sheet provided in Appendix V.
Menu ( See fig. b)
• All items displayed by the control are organized into
various menus
• Menus are listed on the left side of the display (Menu Field)
• To select a menu, use the Menu button
• By pressing and releasing the Menu button, the display
will advance to the next available menu
• Within specific menu selections, a group of items can be
viewed and selected
Item ( See fig. c)
• The abbreviated name of the selected item will be
displayed in the item field of the display
• To view the next available item, press and release the Item
button
• Once you have reached the last available item in a menu,
press and release the Item button to return the display to
the first item in the same menu
Adjustments ( See fig. d)
• To make an adjustment to a control setting, first select the
appropriate menu with the Menu button
• Then select the item you want using the Item button
• Finally, use the up and/or down button to make the change
NOTE: You can get more information by viewing the
Status field of the LCD. The status field shows which
of the control’s outputs are active. Most symbols in
the status field can only be seen when the View
Menu is selected.
4
INTRODUCTION
INTRODUCTION - Navigating the Control
Minimum
Maximum
WWSD
Melting
DHW Demand
Boiler Demand
Mix Demand
Open
Close
Misc
Adjust
min hr
DHW
sec
12
%
!
View
o o
1
Menu Item
Start Stop
F C
3
a
Min
Ma
Me
Open
Close
DHW
12
%
!
1
Menu Item
Start Stop
3
b
Min
Ma
Me
Open
Close
DHW
12
%
!
1
Menu Item
Start Stop
3
c
Min
Ma
Me
Open
Close
DHW
12
%
!
1
Menu Item
Start Stop
3
d