[
Quick Start
]
Quick Start
Adding a Device to the Wireless Controller by
Manufacturer Code
You can add a device to the wireless controller by manually entering its manufacturer’s code.
For a list of manufacturer’s codes, refer to the
Manufacturer’s Codes
section beginning on
page 53.
To add a device by entering its code:
Turn on the device (receiver, TV, etc.) that you want to add to the wireless controller by
pressing the power button on the device.
On the wireless controller, press
OK
to exit the SIRIUS mode. If you have not yet setup
any devices the LCD display scrolls,
Press
sirius to listen to music
-
Press OK to
setup other devices
, otherwise the available devices are displayed.
Press and hold
SET
until the LCD displays
INITIAL SETUP
. Press
OK
.
The LCD displays
Add Device
. The bottom line of the LCD display lists
Receiver
as the
first device you can add. Press
OK
to add your receiver, or press
Scroll Left
( ) or
Scroll Right
( ) to select the device you want add and then press
OK
.
The LCD displays the device name,
Code Setup
, and a 4-digit code. Enter the four-digit
code for your device, for example, 1957. (You can find the code list for your device in
the
Manufacturer’s Codes
section beginning on page 53.) The
SIRIUS
button blinks
once for each digit entry. It blinks twice after the you have entered the final digit.
Your device turns off if the correct code for your device was successfully entered.
Press
OK
to save the code.
Repeat the steps above for each device you want to add, or press and hold
SET
until the
wireless controller exits the menu.
1.
2.
3.
4.
5.
6.
7.
