[
Wireless Controller Operation
]
Wireless Controller Operation
The SIRIUS Conductor includes a wireless controller which allows you to operate up to 12
home entertainment devices as well as your Sirius Conductor Tuner. Read this section to
familiarize yourself with using the wireless controller.
Setting Up Your Wireless Controller
The first time you power up your wireless controller, you will need to pair it with the Sirius
Conductor Tuner.
To pair the wireless controller with the Sirius Conductor Tuner for the first time:
Be sure the red light on the Sirius Conductor Tuner is lit, indicating it is powered on.
The wireless controller’s LCD displays
sirius radio has not been setup.... push ok to set
up...
.
Press
OK
. The LCD displays
Push button on Sirius radio to begin setup
.
Press
RESET
on the Sirius Conductor Tuner. The LCD displays
Push Button again on
Sirius Radio to finish
.
Press
RESET
again on the Sirius Conductor Tuner. The LCD displays
Success! Radio and
Remote are now paired
. Then the LCD displays
Press SIRIUS to listen to music. Press OK
to setup other devices
.
Press
SIRIUS
.
You can now use the wireless controller to control your Sirius Conductor Tuner.
Adding and Deleting Nodes, Network Reset
A
node
is any product which is compatible with a Z-Wave® network. Your Sirius Conductor
Tuner and wireless controller are Z-Wave compatible products and are nodes. Your Sirius
Conductor Tuner and any other nodes added to your wireless controller become part of your
network
.
1.
2.
3.
4.
5.
6.
