[
Wireless Controller Operation
]
Enter the four-digit code for your device using the
0—9
buttons. The
SIRIUS
button
blinks once for each digit entry. It blinks twice after the you have entered the final digit.
If an invalid code is entered, the
SIRIUS
button emits one long blink and the LCD
displays
Invalid
. If the correct code is successfully entered the selected device turns off.
Press
OK
to save the code. Press and hold
SET
to exit the menu..
adding a device by Searching for the manufacturer’s Code
If you cannot locate or do not know the manufacturer’s code for the device you want to add,
you can use the wireless controller to search for the correct code. When the correct code is
found, the device will power off.
To add a device by searching for its code:
Power on the device you want to add.
Press and hold
SET
until the LCD displays
Initial Setup
. Press
OK
.
The LCD displays
Add Device
. The bottom line of the display lists
Receiver
as the first
device you can add. Either press
OK
or use
Scroll Left
( ) or
Scroll Right
( ) to select another device to add and press
OK
.
The LCD displays the device name on the top line and
Code Setup
on the next line.
Press
Scroll Left
( ) or
Scroll Right
( ) to scroll through the manufacturer’s codes.
When the correct code is selected, the wireless controller will turn off the device.
Press
OK
to save the code. Press and hold
SET
to exit the menu.
Note:
If the wireless controller cannot find the manufacturer’s code for your receiver, try add-
ing it as an
Amplifier
and also
Misc. Audio
and searching for a code for these device types.
Replacing a device
This feature allows you to replace an existing device saved in the wireless controller’s pro-
gramming with a new device. This is useful if you replace an existing device with a new one.
Replacing a device overwrites all settings of the device being replaced, such as learned keys
and all other user-programmed features.
To replace an existing device:
Power on the replacement device.
Press and hold
SET
until the LCD displays
Initial Setup
. Press
OK
.
The LCD displays
ADD DEVICE
. Use
Scroll Left
( ) or
Scroll Right
( ) to go to
REPLACE
DEVICE
. Press
OK
.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1.
2.
3.
