[
Wireless Controller Operation
]
1
press the SIRIUS button, the wireless controller will automatically select the correct audio
source input.
Note:
Any learning of key functions for your audio device must be performed before you
choose the audio source input. Refer to the section
Learn Feature
on page 41 for more
information.
To choose the audio source input for the Sirius Conductor Tuner:
Press and hold
SET
until the LCD displays
Initial Setup
. Use
Scroll Left
( ) or
Scroll
Right
( ) to go to
Advanced Setup
and press
OK
.
From
ADVANCED SETUP
use
Scroll Left
( ) or
Scroll Right
( ) to go to
SET AUDIO SOURCE
FOR SIRIUS
. Press
OK
.
Note:
If you only have one SIRIUS radio, i.e., the Sirius Conductor Tuner, skip this step
and proceed to step 4. If two SIRIUS radios are programmed, then LCD displays
OK FOR
RADIO 1 < > FOR RADIO 2
. Use
Scroll Left
( ) or
Scroll Right
( ) to select the radio.
Press
OK
. The LCD displays
SELECT AUDIO DEVICE AND PUSH OK
. Press
Scroll Left
( ) or
Scroll Right
( ) to find the audio device that your SIRIUS radio/tuner is plugged into.
The name of the device is displayed (for example,
Receiver
).
The LCD displays
NOW PUSH OK TO FIND INPUT
. Press
OK
.
The LCD displays
PUSH OK WHEN YOU FIND YOUR INPUT
. The current input label is displayed
in the bottom line (for example,
Input1
). Press
Scroll Left
( ) or
Scroll Right
( ) to find
the input you want to choose (Input1–Input15). Press
OK
to select the displayed input.
The LCD displays
YOUR INPUT IS NOW PROGRAMMED PUSH OK
. Press
OK
.
The LCD displays
SIRIUS Key Now Automatically Changes Input
and exits the menu.
Learn Feature
If you cannot find a manufacturer’s code for a device you want to add, the wireless control-
ler can learn key functions from the device’s remote control. You’ll need to have the original
remote control from the device in order to learn key functions. You can also use the learn
feature to delete key functions which had been previously learned by the wireless controller.
Before you can learn the key functions of the device’s remote control you need to add the de-
vice to the wireless controller. Follow the
Adding a Device by Entering the Manufacturer’s
Code
procedure on page 37 to add the device. When asked to enter the code for the device,
just enter any valid manufacturer’s code for the type of device from the
Manufacturer’s
1.
2.
3.
4.
5.
6.
7.
8.
