[
Installation
]
0
Conductor Tuner to operate with your particular equipment. You may use the provided
audio cable with RCA-type connectors, or purchase an optical cable if an optical con-
nection is desired.
Connect the provided IR blaster cable to the
IR Connect
connector. The other end of
the IR blaster cable should be adhered to your receiver’s infrared remote control win-
dow. To make this connection, peel the backing from the adhesive and adhere the end
of the cable onto your receiver’s infrared remote control window.
NOTE:
If you cannot
find your receiver’s infrared window, try shining a flashlight at your receiver to locate the
infrared “eye.”
Connect the AC Power Adapter to the
5V DC
connector. Plug the AC Power adapter
into a working AC outlet. The red light on the tuner should be lit indicating that the Sirius
Conductor Tuner is on.
Pairing Your Wireless Controller With Your Sirius
Conductor Tuner
The first time you power up your wireless controller, you need to pair it with the Sirius Con-
ductor Tuner. To pair the wireless controller with the tuner:
Be sure the red light on the Sirius Conductor Tuner is lit, indicating it is powered on.
The wireless controller’s LCD displays
sirius radio has not been setup.... push ok to set
up...
Press
OK
. The LCD displays
Push button on Sirius radio to begin setup.
Use a pen (or other pointed object) to press the
RESET
button on the Sirius Conductor
Tuner. The LCD displays
Push Button again on Sirius Radio to finish
.
Press the
RESET
button again on the Sirius Conductor Tuner. The LCD displays
Suc�
cess! Radio and Remote are now paired.
Then the LCD displays
Press SIRIUS to listen to
music. Press OK to setup other devices.
Press
SIRIUS
.
You can now use the wireless controller to control your Sirius Conductor Tuner.
3.
4.
1.
2.
3.
4.
5.
6.
