[
Wireless Controller Operation
]
1
Resetting to factory Settings
Resetting the wireless controller to its factory settings will delete everything that has been
programmed in the wireless controller, including all devices which have been added to the
wireless controller. Use caution when restoring to the factory settings.
To perform a factory reset:
Press and hold
SET
until the LCD displays
Initial Setup
. Use
Scroll Left
( ) or
Scroll
Right
( ) to go to
Advanced Setup
and press
OK
.
From
ADVANCED SETUP
press
Scroll Left
( ) or
Scroll Right
( ) to go to
RESET REMOTE
.
Press
OK
.
The LCD displays
TO RESET ALL FEATURES PUSH OK
. Use
Scroll Left
( ) or
Scroll Right
( ) to go to
To
RESET TO FACTORY SETTING PUSH OK
. Press
OK
.
The LCD displays
PUSH OK TO CONFIRM OR SET TO CANCEL
. Press
OK
.
The LCD displays
THIS CLEARS ALL EVEN CODE SETUP ARE YOU SURE?
Press
OK
.
The LCD displays
Reset Confirmed
. The wireless controller is now reset to its original
factory programming and exits the menu.
Remote Copy Feature
The remote copy feature allows you to send all the programming from the wireless controller
to another remote control creating a second remote for your network. It also allows you to
receive all the programming from another remote control to your wireless controller.
Note:
Using the wireless controller to replicate a third-party manufacturer’s remote causes
the wireless controller to be part of the network which slows down performance if it’s part of
a greater network of nodes. For best performance, the wireless controller should only use one
third-party node as a router (range extender) that is not part of a greater network. The more
nodes in a network, the slower the communication will be with the Sirius Conductor Tuner.
Transmitting Programming to another Remote Control
Transmitting the programming from your wireless controller to another remote control will
create a secondary remote control. You will need to follow the instructions of the other remote
control to prepare it to receive the programming from the wireless controller.
To transmit the programming of the wireless controller to another remote control:
Press and hold
SET
until the LCD displays
Initial Setup
. Use
Scroll Left
( ) or
Scroll
1.
2.
3.
4.
5.
6.
1.
