[
Quick Start
]
To set up your wireless controller to control your receiver’s volume:
Temporarily connect the IR blaster cable to your receiver’s infrared remote control
window.
Note:
If you cannot find your receiver’s infrared window, try shining a flashlight
at your receiver to locate the infrared “eye”.
Press
OK
to exit the SIRIUS mode. Then press and hold
SET
until the LCD displays
Initial Setup
.
Press
Scroll Left
( ) or
Scroll Right
( ) until the LCD displays
Advanced Setup
. Press
OK
.
The LCD displays
SEt Volume control
. Press
Scroll Left
( ) or
Scroll Right
( ) to find
Set Audio Source For SIRIUS
and press
OK
.
The LCD displays
Select Audio Device AND Push OK
. Press
Scroll Left
( ) or
Scroll
Right
( ) to find the audio device that the Sirius Conductor Tuner is connected to. The
wireless controller displays the name of the device (for example,
Receiver
). Press
OK
.
The LCD displays
NOW PUSH OK TO FIND INPUT
. Press
OK
.
The LCD displays
PUSH OK WHEN YOU FIND YOUR INPUT
. The current input is displayed on
the bottom line (for example
Input1
). Press
Scroll Left
( ) or
Scroll Right
( ) to find
the input you want to choose. Each time you press
Scroll Left
( ) or
Scroll Right
( ),
the wireless controller transmits a signal to your receiver. When your receiver selects the
correct input for the Sirius Conductor Tuner, press
OK
. For example, if you connected
the Sirius Conductor Tuner to the
SAT
input on your receiver, press
Scroll Left
( ) or
Scroll Right
( ) until the receiver changes to the
SAT
input.
The LCD displays
Your input is now programmed push OK
. Press
OK
to save the input.
NOTE:
Some receivers do not have discrete input selections but instead use a single
input select to cycle through all available inputs. If your receiver operates in this way,
simply use the
INPUT
key (below the
7
button on the wireless controller) to cycle to the
appropriate audio input for the Sirius Conductor Tuner.
The LCD displays
SIRIUS Key Now Automatically Changes Input
and exits the menu
Permanently adhere the IR blaster cable to your receiver’s infrared remote control win-
dow by peeling the backing from the adhesive on the end of the cable and sticking the
end of the cable onto your stereo’s infrared remote control window.
You can now use your wireless controller to control your receiver’s volume whenever you
press
Vol+
,
Vol–
, or
MUTE
on the wireless controller when you’re in the SIRIUS mode.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
