[
Wireless Controller Operation
]
Special Display Messages
The wireless controller may also display status information about the Sirius Conductor Tuner.
These messages are described in the following table.
Message
Explanation
Out of Range
The LCD displays
Out of Range
whenever the wireless controller and the
Sirius Conductor Tuner cannot communicate because they are too far apart
or out of range because of some other interference. The display returns to
normal when the wireless controller is again within range of the tuner.
Acquiring
Signal
The LCD displays
Acquiring Signal
whenever the satellite signal is lost.
This message pops up when the wireless controller is out of range, and
returns to the normal display automatically when the Sirius Conductor
Tuner regains the satellite signal.
Updating
Channels
The LCD displays
Updating Channels
whenever a channel update from
SIRIUS is detected. While the channels update, the percentage of update
progress is displayed on the screen.
Subscription
Updated
The LCD displays
Subscription Updated
whenever SIRIUS broadcasts a
subscription update. Press any SIRIUS-related key to complete the update.
Antenna Not
Detected
The LCD displays
Antenna Not Detected
whenever there is no antenna
detected. If this message appears, check that the antenna is securely
connected to the Sirius Conductor Tuner. The normal display returns
automatically when the antenna is detected again.
Invalid
Channel
The LCD displays
Invalid Channel
whenever you enter a channel number
that does not exist. After two seconds, the current, active channel informa-
tion, is re-displayed.
SIRIUS ID
Number (SID)
To display your SIRIUS ID (SID) number, tune to channel 000. You can
also display the SID by selecting Sirius ID from the Menu Options screen.
