[
Quick Start
]
Adding a Device to the Wireless Controller by Searching
for the Manufacturer Code
To add a device to the wireless controller by scrolling through a list of manufacturer codes,
perform the following steps:
Turn on the device (receiver, TV, etc.) that you want to add to the wireless controller by
pressing the power button on the device.
On the wireless controller, press
OK
to exit the SIRIUS mode. If you have not yet setup
any devices the LCD display scrolls,
Press
sirius to listen to music
-
Press OK to
setup other devices
, otherwise the available devices are displayed.
Press and hold
SET
until the LCD displays
Initial Setup
. Press
OK
.
The LCD displays
Add Device
. The bottom line of the display lists
Receiver
as the first
device you can add. Press
OK
to add your receiver, or press
Scroll Left
( ) or
Scroll
Right
( ) to select the device you want add and then press
OK
.
The wireless controller displays the device name on the top line and
Code Setup
on the
next line. Press
Scroll Left
( ) or
Scroll Right
( ) to scroll through the manufacturer’s
codes for the selected device. When you have selected the correct code, the wireless
controller turns off the device.
Press
OK
to save the code.
Repeat the steps above for each device you want to add, or press and hold
SET
until the
wireless controller exits the menu.
Controlling Your Receiver’s Volume and Setting Its Audio
Source Using the Wireless Controller
You must first add your receiver to the wireless controller before setting it to control the
receiver’s volume. (Refer to the previous sections for adding a device.) Also verify that it is
possible to control the volume of your receiver using the wireless controller before perma-
nently adhering the IR Blaster to your receiver.
If you cannot add a device using its manufacturer’s code, try having the wireless controller
learn the setup from the remote control of the device. (Refer to the section
Learn Feature
on
page
41.
)
1.
2.
3.
4.
5.
6.
