Universal Electronics Sirius Conductor, Installation & User Manual

Page: 42 / 78

[
Wireless Controller Operation
]
0
Press and hold SET until the LCD displays
Initial Setup
. Press OK .
The LCD displays
ADD DEVICE
. Press Scroll Left ( ) or Scroll Right ( ) to go to
VIEW
CODE
. Press OK .
The first line of the LCD displays the long name of the current device and the third line
displays the 4-digit code number for the device.
Press
Scroll Left ( ) or Scroll Right ( ) to view the manufacturer’s codes of other
devices in the wireless controller.
After viewing the codes, press
OK or SET to exit the menu.
Changing a device Code
To change the manufacturer’s code for a device which had been added to the wireless
controller:
Power on the device for which you are changing the manufacturer’s code.
Press and hold
SET
until the LCD displays
Initial Setup
. Press
OK
.
The wireless controller displays
ADD DEVICE
. Press Scroll Left ( ) or Scroll Right ( ) to
go to
Change Device CODE
. Press OK .
The LCD displays
Change Dev Code
on the first line. The second line of the LCD displays
the current device in the middle and any other devices on either side of the current de-
vice. Press
Scroll Left ( ) or Scroll Right ( ) to select the device you want to change
and then press OK .
The LCD displays the name of the device and the current code (for example,
Cable Box
Code Setup 0877
). Enter the new four-digit code for the new device using the
0–9
keys.
The
SIRIUS
button blinks once for each digit entry. It blinks twice after the you have
entered the final digit.
If an invalid code is entered, the
SIRIUS button emits one long blink, and the LCD
displays
Invalid
. If the correct code is successfully entered, the selected device turns off.
Press OK to save the code. Press and hold SET to exit the menu.
Choosing an Audio Source
If you have an audio receiver or amplifier with multiple inputs, you can program the wireless
controller to automatically select one of its inputs as the audio source for your Sirius Conduc-
tor Tuner when the SIRIUS button is pressed on the wireless controller. Then when you
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.