UniPOS Repeater IFS7002R
Instruction Manual Page 5
Revision 2/16.11.09 Of 62
5. General information
Management is done by panel buttons, displayed on touch screen. Depending
to the selection menu, screen or function, different buttons are active.
An important condition for the durability of touch screen panel is required for
compliance with it.
The purpose of the stylus (pos.1, fig.1) is comfortable and save with touch
screen panel.
With the stylus is pressed lightly in the button depicted. The self-adhesive pad
of the carrier(
поз
.2,
фиг
.1) allows for easy fixation at the proper place.
1
2
Fig.1
5.1. Access levels
Four levels of access to the variable indications and control functions of IFS7002R are available.
5.1.1.
Access level 1
All persons who would presumably find out and react to alarm upon fault condition or fire condition
have access to level 1.
The following actions are accessible:
−
Displaying suppressed messages for Fire condition, Fault condition, Disabled
components and Zones in test.
−
Entering inspection time period.
−
Forced proceeding from phase Fire condition stage I to Fire condition stage II.
−
Suppressing the local sounder.
−
Displaying text messages from inputs.
−
Displaying program data for the repeater.
−
Displaying the status of the addressable devices in the loops of the fire control panels
connected to it.
Al light indicators of the repeater are visible.
5.1.2.
Access level 2
The personnel in charge of the fire protection have access to level 2; they shall be authorized and
trained to operate the repeater and the fire detecting system in the following conditions:
−
Duty Mode
−
Fire condition
−
Fault condition
−
Disabled component
−
Information and adjustment
To enter Access level 2 use your password.
The following features of the repeater are accessible:
−
All features accessible at Level 1.
−
Switching off the outputs, activated upon fire condition.
−
Exit of Fire condition.
−
System functions of the repeater.
5.1.3.
Access level 3
Accessible for personnel trained and authorized to:
−
Reconfiguration of specific data – of the protected site, saved in the repeater or the fire
control panels connected to it.
−
Maintenance the established fire detecting system.
To enter Access level 3 use your password.
5.1.4.
Access level 4
Accessible for personnel trained and authorized by the Producer to repair the repeater and to modify
its software. Special means are required to enter this level.
