UniPOS Repeater IFS7002R
Instruction Manual Page 25
Revision 2/16.11.09 Of 62
The screen shows the connected
objects and prides information:
-
CAN Address
-
Object Name
-
Status
-
Faults
-
Fires
-
Disabled outputs
The symbol “
>>
” is on posiiton of the
first remote objects.
With buttons
(“Move Down”) and
(“Move Up”) select the concrete
remote panel, which faults will shown
on the display.
9.4.1.2.
Screen “Repeater configuration”
The screen displays information
associated with:
-
The repeater local network
condition (On or Off).
-
The selected language of
the text messages.
-
Check for ground wire (this
option is not active for the
repeater).
The software version of the repeater
is displayed in the right part of the
heading line, for example
“v16.11.09”.
9.4.1.3.
Menu “Repeater parameters”
Use the menu if the repeater is connected to PC or to view the parameters of the established CAN
network.
The menu contains two subordinate menus:
-
Menu “Network”
-
Menu “Local Network”
Mode DAY
REP ActInp: 0000
11:44:29
Wed 24 Aug 2011
Repeater IFS7002R
UniPOS
List CAN Objects
Total connected CAN objects: 6
Addr Name Stat Faults Fires DiOut
>>
2 Building#1 Yes 0000 00/00/00 0/0
3 Building#2 Yes 0000 00/00/00 0/0
4 Building#3 Yes 0000 00/00/00 0/0
5 Building#4 Yes 0002 00/00/00 0/0
6 Ware house Yes 0000 00/00/00 0/0
Mode DAY REP ActInp:0000
11:23:10 Wed 24 Aug 2011
Repeater IFS7002R
UniPOS
Repeater configuration v16.11.09
Local network: On
Periphery device 1: none
Periphery device 2: none
Periphery device 3: none
Power loop: On
Language: Bulgarian
Check for ground wire: Off
