UniPOS Repeater IFS7002R
Instruction Manual Page 52
Revision 2/16.11.09 Of 62
10.4.4.2.
Menu
Level 3
The menu allows the user to enter
and edit a password for Access Level
3:
To enter or edit a password use the
digit buttons – when you press a
button, the digit is inserted over the
position of the cursor, and the
previous text and the cursor move
one position to the right.
Move the cursor to the left or to the
right using buttons
and
.
Press
to delete:
- The digit under the cursor, if
any;
- The digit to the left of the cursor, if no digit is available under the cursor.
The maximum length of the password is 10 symbols. If you press a button after the 10-digit password
is entered, the exceeding symbol will not be accepted.
When you press button
the last entered password will be saved in the control panel.
10.4.4.3.
Menu
Options
In IFS7002R an option is provided possible to use button
(“Outputs”) at Access level 1.
Button is displayed when the repeater is in Fire condition and served to suppress/enable outputs in
the connected Fire control panel.
Addressable outputs, activated by the inputs, can not be suppressed.
To use this option in the fire control panel enter menu “Setup/New passwords/Options”
.
Upon entering the menu the following setup window appears.
To edit the parameter press button
– when pressed its value
changes alternatively:
-
Yes – a password for
disabling/enabling the
activated outputs in Fire
condition is required.
-
No – a password for
disabling/enabling the
activated outputs in Fire
condition is not required.
Press button
to save the
selected parameter in the
repeater.
Attention!!!
The activation of this function (a password for suppressing/disabling the activated outputs in Fire
condition not to be required.in IFS7002) is not in conformity with the European Standard EN54-2 and
it must not be used in the countries where that standard is valid.
С
Mode DAY
REP
18:44:51
Mon 28 Mar 2005
PASSWORD Level 3
New password: 1091_
0
1
2
3
4
5
6
7
8
9
С
Mode DAY
REP
10:08:31
Wed 24 Aug 2011
Options
Password to disable the outputs: Yes
