UniPOS Repeater IFS7002R
Instruction Manual Page 27
Revision 2/16.11.09 Of 62
Mode DAY REP ActInp:
0000
16:37:37
Wed 24 Aug 2011
REPEATER IFS7002R
UniPOS
Select Repeater/ Remote Fire Control Panel
Select object for List/System/Setup:
Repeater
9.4.1.3.2.2.Menu “CAN Objects” –
allows CAN parameters of the fire
control panels connected to the
repeater to be reviewed.
9.4.1.4.
Menu “Select Rep/Rem Fire Control Panel”
The menu provides the option to select the fire control panel to be setup or which parameters, events
or status will be reviewed.
The button
alternatively change the
object for preview (example
: “Security”,
“Building#1”,”Building#2” and etc.)
till
counting of all network connected panels.
During object preview change, in the left
bottom part of the display shows note
message “Data no saved”. The changes
which were made will be accepted via
pressing of button, after that the
message “Data no saved” is cleared.
9.4.2. Menu “System Function”
The menu contains the following
subordinate menus and functions:
-
Disables
-
Zones in test
-
Set Clock
-
Set Mode
-
Check LEDs and Buzzer
Access to the subordinate menus is allowed at Access Level 2.
If wrong password is entered, when you press button
the digits will be deleted and the cursor
will move back to the first position. If one of the 10 passwords for Access Level 2 or Access Level 3 is
entered, when you press button
the menu will become active.
Mode DAY REP ActInp:
0000
16:37:37
Wed 24 Aug 2011
REPEATER IFS7002R
UniPOS
CAN object parameters
Name CAN object Fire ControlPanel 002
Priority communication level: Slave
CAN communication port: CAN
CAN Type of connection: Direct
CAN Address: 2
CAN Address of Repeater: 0