UniPOS Repeater IFS7002R
Instruction Manual Page 46
Revision 2/16.11.09 Of 62
Mode DAY
REP
14:18:38
Wed 24 Aug 2011
Set Up Delete CAN Object
Total connected CAN objects: 2
>>
Building #1 CAN Address: 2
Transport gate CAN Address: 4
Mode DAY
REP
14:18:38
Wed 24 Aug 2011
Set Up Delete CAN Object
Total connected CAN objects: 3
>>
Building #1 CAN Address: 2
Building #2 CAN Address: 3
Transport gate CAN Address: 4
Use this menu to delete CAN
objects connected to the repeater.
When the menu is selected a
window appears containing a list of
the CAN objects connected to the
repeater:
-
Delete the object with the
pointer
>>
opposite it.
-
Confirm delete of the marked
object with button
. After
pressing it the marked object
is automatically deleted.
Example:
In the local network to the
remote panel “Security” are
connected 3 objects:
-
Building#1 - CAN address 2
-
Building#2 - CAN address 3
-
Transport gate –
CAN
address 4.
If its must be deleted “Building#2”. Via
buttons for moving, should place the
marker on “Building#2” and press
button
for confirmation of the
deleting and “Building#2” automaticly
removes from the assigned CAN
objects.
The objects on the display are 2:
-
Building#1 – CAN address 2
-
Transport gate –
CAN
address 4
10.4.2.2.3.3.
Menu “Review/Change CAN Objects”
Use this menu to review and edit the parameters of the CAN objects connected to the repeater. First,
select the CAN object which parameters will be reviewed and edited.
Use the buttons
,
,
,
and cursor
>>
, marking the selected CAN object for review
or change.
