![background image](http://html.mh-extra.com/html/union/cwd2005-dpc/cwd2005-dpc_operating-instructions-manual_842961081.webp)
CWD2005 DPC
Operation combustion calorimeter
chapter — page:
7—53
7.6.1.1.3.1 Main menu - Options - System - General
The command "Change signals after hold" causes a smooth transition after a cali-
bration or after switching off the signal stop condition. This avoids a sudden rise or
drop of the measurement value in the measurement curve. The continuous transi-
tion is specified in seconds.
Purge time after cooling
Specifies the time period after which the
screen is switched off after no input has
been given.
Screen switch-off time
Specifies the time period after which the
screen is switched off after no input has
been given.
Display speed
Refers to a time constant in different burn-
ers. This is pre-set by the manufacturer
and depends on the burner type.
Carrier gas check cycles
Specifies the time periods in minutes dur-
ing which the carrier gas is calibrated.
Summary of Contents for CWD2005 DPC
