Union CWD2005 DPC, Operating Instructions Manual, Page: 35 / 120

CWD2005 DPC
Connections, transport, setting up
chapter — page: 5—7
5.3 Ambient conditions
ATTENTION
Ambient conditions during storage and set up.
Observe the ambient conditions! Contact UNION Instruments GmbH if the system
has been stored for more than three months or needs to be operated or stored un-
der ambient conditions other than those specified!
5.3.1 Storage conditions
Freezing condensate water in the system can cause defects. Make sure that the
system is free from gas / humidity residue.
Storage temperature: -15 - 60°C
Humidity: 0 - 95% relative humidity
Ambient pressure: 700 - 1400 hPa (0.7 - 1.4 bar)
5.4 Installing and connecting
DANGER
Risk of explosion!
Danger due to invalid cable glands!
If improper cable glands are used, the explosion protection cannot be ensured an-
ymore!
•
Only use cable glands approved for the required ignition protection type!
•
Observe the technical data when selecting / using cable and line glands!
Danger due to open drilled holes or unused cable glands!
If drilled holes are open or cable glands unused, the explosion protection cannot
be ensured anymore!
•
Always close open drilled holes and unused cable glands with approved
sealing plugs!
•
Sealing plugs must be inserted with a tool!
•
Observe the technical data when selecting/replacing suitable sealing
plugs!