Union Instruments CWD2005 SPC, Original Operating Instructions

Page: 89 / 110

Decommissioning / Switching off
89
10 Decommissioning / Switching off
WARNING
Endangerment of people and equipment when the combustion calorimeter is de-
commissioned by non-instructed personnel!
Allow only instructed/trained service technicians to carry out decommissioning!
NOTICE
In order to decommission the combustion calorimeter, also decommission the
linked system components according to their operating instructions!
NOTE
The following table contains steps for decommissioning for an extended down-
time.
To switch off the combustion calorimeter only temporarily, some steps can be
omitted:

Switching off column!
Steps
Switching
off
Decom-
mission-
ing
Disconnect the device from the process, professionally close the line.
X X
Bring linked system components to a standstill.
X X
Switch off the main switch.
X X
If the combustion calorimeter is to be taken out of service only temporarily, the pro-
cess ends here!
Professionally disconnect/switch off owner-side energy supplies, media supply, and
signal transmission.
X
When appropriate, pack the combustion calorimeter in a suitable manner.
Ensure before starting or restarting transport that all transport securing devices are at-
tached.
X