www.ultratecfx.com
18
Programming Time Code Shows
Time Code Shows are to be recalled in RUN TIME CODE SHOW mode from the Main Menu.
The TIME CODE SHOWs are to be controlled through an external Show Control System.
The Controller has been fitted with a MIDI control circuit board to function with Time Code.
See the section on MIDI Show Control for further details of show control operation.
To program a Time Code Show, the SAFE/ARMED key must be in SAFE position and the Data Link
switch must be off (not illuminated).
When the Pyro Logic Controller is powered on, the operator will see the Start up screen.
Start Up Screen
SureFire Pyro Contoller
Press ‘Start’ key to begin VX.XX
Where X.XX is the code version
The >START< key is used to continue to the HOME SCREEN.
Home Screen.
PROGRAM OPERATOR SHOW
RUN OPERATOR SHOW
*PROGRAM TIME CODE SHOW*
RUN TIME CODE SHOW
The UP/DOWN arrow keys move the * Asterisk * that highlights the current selection.
To chose the * highlighted * function, press >START< (Capitalized words surrounded by the > < refer
to keys on the keypad.).
At the Home Screen, select
*PROGRAM TIME CODE SHOW*
Press >START< to continue to the Program Operator Show Menu.
