www.ultratecfx.com
20
Notes
The Program will only accept 1 channel number at a time.
A channel selection must be followed by >ENTER< .
Channel numbers can be entered in any order (out of sequence).
A sample group channel selection appears as follows
1 208>109>415>211>115>102>711>206E-end
To enter this line as Cue # 1 press the down arrow. The LCD now displays
1 208>109>415>211>115>102>711>206E
2 -end --- End of Show ---
If the channel selections are not correct, press the arrow keys to highlight the incorrect entry. Then
press the >DELETE< key. The >DELETE< key will erase a channel number and the symbol (> + or E)
that follows .
Note that channel selections can be duplicated in the same Cue. The program will assemble the
channel list properly during storage.
If channel selections are repeated in subsequent Cues, the controller will attempt to Fire the repeat-
ed channels in RUN Mode.
Storing Shows and Editing
A completed show must be stored in memory to be recalled in RUN mode to be fired.
To store an operator show, press the >HOME< key, then the Program Exit Menu appears.
Program Exit Menu:
Halting Edit of Show: TC_1
Enter - Save and Exit
Delete - Exit without saving
Home - Continue Edit
Press >ENTER< key to Save and Exit. (Bring up the Program Operator Show Menu)
Press >DELETE< key to Exit without saving. (Bring up the Program Operator Show Menu)
Press >HOME< Continue edit. (Returns to the show memory location being programmed)
