www.ultratecfx.com
9
START
Initializes the Mode selection from the HOME screen.
ENTER
Is a command key to enter data or instructions from LCD screen prompts. Save and Exit in Edit Mode.
Starts Edit Mode when prompted at the Screen..
END CUE
Inserts an ‘E’ to indicate the end of Channel selections for the Cue. Adds next numerical Cue # in
order.
DELETE
Will Delete cue information in reverse order or cancel certain LCD screen prompts. Exit without sav-
ing in Edit Mode. Erases memory location when prompted at the Screen.
CHASE
Inserts the ‘+’ symbol to indicate that a Channel selection, or Groups of Channels, (stages) will be fol-
lowed by a Delay Time.
DELAY
Calls the Delay Time select screen where the time value of the ‘+’ symbol is determined. (Chase
speed).
VIEW
Flashes the bottom line of the LCD at the current Chase Speed. Review programmed show when
prompted at the Screen.
UP ARROW
Scrolls LCD display UP Cue to Cue. (9, 8, 7, 6 etc.).Also used at some prompt screens.
MEM 1 to MEM 4
Memory locations for operator controlled shows
TC 1 to TC 4
Memory locations for operator programmable/Time Code controlled shows. (see MIDI Show Con-
trol).
HOME
Returns to the HOME screen. Operator will be prompted to confirm this action. The HOME key func-
tions at the MEMORY SHOW COMPLETE (end of show) screen in Run Mode, and returns to the previ-
ous Menu in Edit Mode.
