www.ultratecfx.com
21
Editing a programmed memory location can be done at the Program Operator Show Menu by high-
lighting the memory location and pressing the >ENTER< key to bring up the contents of that memo-
ry location.
Use the arrow keys to highlght the cues to be edited. Use the >DELETE< key to remove incorrect
channel.
To add a channel, use the arrow keys to highlight the channel following the channel to be inserted.
Select the channel to be inserted as you normally would using the encoder and channel select but-
tons.
Time Code Run Mode
To recall and run a programmed show,
At the Main Menu select:
*RUN TIME CODE SHOW*
Press >START<
This prompt appears
RUN A PREVIOUSLY PROGRAMMED SHOW
BY RECALLING ANY OF THE OP PROGRAMS
Select the programmed memory keys to be loaded by selecting a key from T.C.1 through T.C.4.
Note that the >Mem.1< keys will not respond in Run Time Code Show.
This prompt appears
RUN OPERATOR X MEMORY SHOW
ARE YOU SURE?
PRESS >DELETE< TO CANCEL
PRESS >ENTER< TO CONFIRM
Pressing >ENTER< will load the selected Show from memory.
The LCD displays READY FOR TIME CODE.
The Operator can return to HOME only from the MEMORY SHOW COMPLETE screen. To return HOME
the operator must use the Arrow DOWN key to get to the end of the show before returning HOME.
This feature prevents the unintended aborting of a show by way of an errant or mistaken key press
during Run time.
