www.ultratecfx.com
11
The Pyrologic Controller has aRotary Slave Selector Knob and two rows of eight select buttons. The
Selector Knob determines the remote slave module address. The 16 channel buttons refer to the 16
remote channels available at each slave address. The following tables show how a channel may ap-
pear on the LCD display.
Module Encoder Set to Module 1
101 102 103 104 105 106 107 108
109 110 111 112 113 114 115 116
Module Encoder Set to Module 2
201 202 203 204 205 206 207 208
209 210 211 212 213 214 215 216
Module Encoder Set to Module 3
301 302 303 304 305 306 307 308
309 310 311 312 313 314 315 316
This system of the first digit representing the slave module address and the second 2 digits repre-
senting the channel on that slave continues up to the Encoder limit of 9.
Each 16 channel slave address has channels numbered 01 thru 16 on their channel outputs. The
push button encoder on the slave module determines the slave’s current address (first digit of the
channel number).
Note that the standard 48 channel modules are in fact 3 groups of 16 channels and therefore occupy
3 slave module addresses. Each of the 3 addresses are selectable by the user using the push button
encoders on the module.
Channel Select Buttons and Encoder (Remote Slave Selector).
RS232 Port
Used for Data Transfer form pc or Laptop computer.Female DB9 Connector
Little Lite Connector
3 Pin XLR for Little Lite (included) Pins 1 and 3 are used
