UFESA AA7030 polar, Instruction Manual

Page: 40 / 132

40
WE WOULD LIKE TO THANKS YOU FOR CHOOSING UFESA. WE WISH THE PRODUCT
PERFORMS TO YOUR SATISFACTION AND PLEASURE
WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR USING THE PRODUCT.
STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE
SAFETY INSTRUCTIONS
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
If the supply cord is damaged it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Appliance shall be installed with national wiring
regulations.
Minimum permissible distance for top and back part of the
appliance to adjacent structures is 50 cm.
Appliance uses T type fuse rated at 250V voltage and 3,15
current.
WARNING
• Do not use means to accelerate the defrosting process or to
clean, other than those recommended by the manufacturer.
• The appliance shall be stored in a room without
continuously operating ignition sources (for example: open
flames, an operating gas appliance or an operating electric
heater).
• Do not pierce or burn.
• Be aware that refrigerants may not contain an odor.
• Appliance shall be installed, operated and stored in a room
with a floor area larger than 12m2.
Maximum refrigerant R290 charge amount: 245 g.
Dispose of refrigerant based on local regulations, properly
process.
Servicing shall be performed only as recommended by the
manufacturer.
WARNING: Keep ventilation openings clear of obstruction.
WARNING: Appliance shall be stored in a well-ventilated area
where the room size corresponds to the room area as
specified for operation.
WARNING: Appliance shall be stored in a room without
continuously operating open flames (for example an
operating gas appliance) and ignition sources (for example an
operating electric heater).
The appliance shall be stored so as to prevent mechanical
damage from occurring.
Any person who is involved with working on or breaking into
a refrigerant circuit should hold a current valid certificate from
an industry-accredited assessment authority, which
authorizes their competence to handle refrigerants safely in
accordance with an industry, recognized assessment
specification.
Servicing shall only be performed as recommended by the
equipment manufacturer. Maintenance and repair requiring
the assistance of other skilled personnel shall be carried out
under the supervision of the person competent in the use of
flammable refrigerants.
This device is designed for use at maximum altitude up to
2000m above sea level.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or industrial use under
any circumstances. Any incorrect use or improper handling of the product shall render the warranty null
and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle.
Never attempt to turn off the appliance by disconnecting the plug.
To avoid risk of fire or explosion, do not spray to the appliance. Do not put any inflammables or chemicals
near the unit.
To prevent plastic parts from melting or catching on fire, do not place the appliance near heating
appliances.
Moving and hot parts: Do not operate unit with back cover removed.
The appliance must be used on a level and stable surface.
Do not use outdoors.
Be careful that a heating appliance is not exposed to the wind from the appliance.
Do not cover the unit with washed clothes or similar.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an
official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs or
procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
DESCRIPTION
1. Handle
2. Air inlet (left)
3. Control panel
4. Air Outlet
5. Casters
6. Remote controller
7. Air inlet (right)
8. Main air inlet
9. Dehumidification drainage nozzle
10. Air inlet grille
11. Exhaust duct
11. Window kit
REMOTE CONTROLLER
a. High fan
b. Mid fan
c. Low fan
d. Swing key
e. Timer key
f. Up
g. Down
h. Heat function
i. Cool function
j. Dry function
k. bFan function
l. Cº/ºF switching key
m. On/off key
CONTROL PANEL:
1. Timer
2. Fan
3. Up
4. Display
5. Down
6. Mode
7. On/off
BEFORE INITIATION
Be sure to remove any packing material from the inside of the appliance.
To avoid damage, place the unit in an upright position for at least 24hours before initiation.
Make sure that the air outlet and air inlet are never blocked.
Only operate the unit on a horizontal surface to ensure no water leaks out
INSTALLATION
Place the appliance at even and dry place, and keep it at least 50 cm away from its surrounding object
(Fig.1).
Screw the exhaust duct assembly in the air outlet behind the panel (anti clockwise) (Fig. 2)
Insert the air exhaust hose into the window sealing plate, adjust opening width of window so that the
window can match with the sealing plate properly; length of the sealing plate is adjustable (Fig 3).
Correct installation:
It’s important to keep the exhaust duct smooth. Incorrect installation will affect work of the A/C.
Prevent the exhaust duct from seriously bending.
Ensure air can flow smoothly in the duct.
Warning:
The exhaust duct is designed especially for this model.
Do not replace or lengthen it; otherwise, it will result in failure. (Fig.4)
Notice:
The maximum developed length of the exhaust duct is 1,500mm.
It’s better to shorten it while use and keep it horizontal while installation.
FUNÇÕES
ON/OFF button
Press the key to turn ON/OFF the portable air conditioner
Mode
Press that button to choose between, heating, cooling, fan and dehumidification mode.
Temperature/ time adjusting
Press the key at cooling mode to increase or reduce the setting temperature; Press it at timing mode to
adjust timing on/off time.
Press up and down keys simultaneously to switch Fahrenheit and Centigrade degree temperature.
Fan
Press the key to choose high or low gear wind speed
Timer
The appliance has 24 hours’ timer. Press this button to set a timer for auto start or auto stop
Swing function
Press this button at any time after turning on the appliance to swing the wind guide bar automatically.
Cº/ºF switching
Press the key to switch ºC and ºF
OPERATION METHOD
Use:
Unwind the cable completely before plugging in.
Plug the appliance into the mains.
Orient the appliance to direct the air flow to the desired direction.
Switch the appliance on by pressing the On / Off button.
Select the desired mode.
Select the desired speed.
Cooling mode:
Once this mode is selected, the icon will light on.
Press the up/down key to adjust the temperature (16ºC~30ºC).
Press the speed key to choose the low, middle or high speed.
Heating mode:
Once this mode is selected, the icon will light on.
Press the up/down key to adjust the temperature (16ºC~30ºC).
Press the speed key to choose the low, middle or high speed.
Fan mode:
When selected that mode, the wind indicator lamp lights up.
Press the speed key to choose the desired one (low, middle or high speed)
Note: When the appliance is under the fan mode, the temperature cannot be set up.
Dehumidification mode:
Once you selected that mode, the dehumidification indicator lamp lights up.
Remove the dehumidification water wedge, insert water manifold, place the other end of the water
manifold into the water vessel or drainage passage (Fig.5).
After entering on the dehumidification mode, if the room temperature is 17ºC (62ºF), the compressor is
ON.
When the room temperature
≤
15ºC (59ºF), the compressor is OFF; when the temperature increases to
room temperature
≥
17ºC, the compressor is started again (in order to protect the compressor, it will be
restarted 3min. later).
In dehumidification mode, the fan is defaulted to run at low speed, and wind speed can’t be adjusted.
Temperature cannot be set.
Note: when use dehumidify function, should remove exit pipe components, otherwise, it will cause
worse dehumidify performance, and appear “FL” water full alarm.
Timer mode
In standby state, press the Timer key to set ON time. Press Up and Down keys to set ON time (1~24H),
and the timer indicator lamp lights up.
In ON state, pressure the timer key to set OFF time. Press Up and Down keys to set OFF time (1~24H),
and the timer indicator lamp lights up.
AFTER HAVE FINISHED USING THE APPLIANCE
Stop the appliance by releasing the pressure on the on/off button.
Unplug the appliance from the mains.
For storing, stand the unit upright and avoid exposure to the direct sunlight.
CLEANING
Turn off the unit and disconnect the power plug before starting any cleaning task.
Drainage method
This product is equipped with automatic water vaporization system. The condenser is cooled with the
circulating of condensing water, so as to improve cooling efficiency and save energy.
If the internal vessel is full of water, the display screen will display “FL”, and the compressor stops
working automatically. After power off, unscrew the water cover, pull out the water wedge to drain off
water, and it will become normal after being restarted (Fig.6)
Cleaning the body:
Wipe the dehumidifier with a dry and soft cloth.
To remove heavy dirt, wipe it with a cloth wrung tightly.
Never use a wet cloth for cleaning the control panel.
DO NOT IMMERSE IN WATER OR ANY OTHER LIQUID.
To avoid any deformation or cracking, do not use benzene, thinner or liquid cleaners.
Chemical cloth may cause the change in the colour of the unit.
Air Filter
It is recommending you to clean the filter every 2 weeks.
If it is blocked by dust, efficiency of the machine will be reduced.
Take out the air inlet grille and pull out the filter screen at both sides according to the direction shown in
the following figures.
Put the filter screen into the warm water added with neutral detergent, dry it at a shady place after
cleaning.(Fig.7)
Seasonal cleaning
If the appliance is not used for a long time:
- Pull out the water wedge to drain.
- Run the appliance in fan mode for 2h until it is dry
- Turn off the portable air conditioner and unplug it.
- Wash the filter screen and reassemble it
- Dismantle the exhaust duct and keep it properly
- Cover the A/C with a plastic bag and place it in a dry place
TROUBLE-SHOOTING
Take the appliance to an authorised technical support service if product is damaged or other problems
arise. Do not attempt to disassemble or repair the appliance yourself as this may be dangerous.