TYM TX1500, Manual

Page: 87 / 218

2 - 0
2 - 1
2 - 0
2 - 1
DESCRIPTION OF OPERATING SYSTEM
2
(15) 4wD (4-wheel Drive) switch
The 4WD is used to obtain large
traction by driving the four wheels.
Pressing the upper section of the
switch engages the 4WD while
pressing the lower section disen-
gages the 4WD.
When the 4WD is engaged, the 4WD
indicator on the instrument cluster is
illuminated.
Examples of useful conditions
of 4wD
The 4WD can be useful under the
following conditions:
①
When cultivating in a field
②
When traction is required on a
slope, in a wet field or for towing
a trailer
③
When working in a wet or sandy
field
④
When cultivating on firm soil with
a rotavator to prevent the tractor
from being pushed forward
⑤
When driving into/out of a field or
going over a field bank
•
(16) Front axle suspension switch
This switch is used to activate and
adjust the height of the suspension
of the front axle.
This function relieves shock applied
to the front axle by adapting the
suspension to the road condition.
Adjusting range: ± 45 mm
<Automatic mode>
In this mode, the front axle is set in
the middle between the upper and
lower moving height. The left and
right sides are operated separately.
•
•
TX1O336A
Up/Down switch
TX1O337A
Automatic mode switch
When the driving speed is over
20 km/h, the 4WD is automatically
deactivated.
•
NOTE
Avoid using the 4WD on a road or
hard soil. The tires can be worn
excessively.
If stopping the engine while the
4WD is engaged, starting the en -
gine again automatically engages
the 4WD.
•
•
NOTE
TX1500-영문-02(나).indd 31 2012-12-17 오후 2:25:07