TYM TX1500 Manual Download Page 55

Page: 55 / 218

1 - 11

GENERAL INFORMATION

TX1O208A

3. USE OF THE MACHINE

Use this machine for transplanting

rice.
Using this machine for any other

purpose beside the specified use of

this machine or modifying the ma-

chine will expire the warranty per-

manently.

do not modify the machine. If

modified, the functions and per-

formance of machine might be

badly affected and it may also

lead to an accident.
Use for works other than the

specified can cause mechanical

failure and injuries. The manu-

facturer will not hold responsibili-

ty for any injury occurred by mis-

use of the tractor.

•

WARNING

4. SUPPLY TERM FOR

SERVICE PARTS

The service parts of this machine

will be available until 12 years af-

ter the production of this model is

stopped. however, when it comes

to order the special parts even dur-

ing the service term, please consult

your dealer for the lead time before-

hand.
As a rule, supplying service parts

expires at the above mentioned sup-

ply term ends. however, when it is

necessary to order the service parts

even after the term expires, please

consult about the lead time and the

price.

5. REGARDING THE DIRECTION

TERMS OF MACHINE

Terms such as front/back, left/right,

left turn, right turn used in this man-

ual is shown in the figure.

Right turn

(clockwise)

left turn

(counterclockwise)

right

back

front

left

TX1500-영문-01(가).indd 11

2012-12-17 오후 2:23:55

Summary of Contents for TX1500



























































































































































































































Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands

TYM TX1500, Manual

Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands