TYM TX1500, Manual

Page: 83 / 218

2 - 2
2 - 2
2 - 2
2 - 2
DESCRIPTION OF OPERATING SYSTEM
2
<Operation>
Keep the following instructions for
safe and correct use of the electron-
ic lift:
①
When starting the engine, the in-
dicator () comes on to inform
the driver that the interior lift con-
trols cannot be used for now for
safety reason. The exterior lift-
ing/lowering switches (12) on the
rear mudguards are available to
use.
TX1O378A
11
2
10 8
1
A
12
If the control lever (11) is already
in the lifting position (A), set it to
the Stop position first and move it
to the lifting position (A).
•
CAUTION
When driving the tractor with an
implement attached, press the
swing attenuation button to protect
the hydraulic system against im-
pact from an swinging implement.
•
CAUTION
<hydraulic lock operation>
①
Before operation, set the lever
(11) to the lifting position (A) to
lift the implement.
②
Turn the knob () counterclockwise
to its end (toward the turtle symbol).
③
Pull the lock (12) to the right to secure
the lever. (The lever can be fixed only
in the position "A.") Keep other set -
tings as before locking the lever.
<Swing attenuation device>
This device is to protect the hydrau-
lic system against impact from an
implement when driving the tractor
equipped with an implement.
To activate this device, set the lever
(11) to the lifting position (A) and press
the switch (2). Then, the indicator ()
comes on to inform its activation.
②
Set the upper position limit with
the knob () and place the lift
control lever (1) into the lifting
position (A). Then, the indicator
() goes off and the indicator (10)
comes on.
TX1500-영문-02(나).indd 27 2012-12-17 오후 2:25:04