TYM TX1500 Manual Download

Page: 100 / 218

2 -

DESCRIPTION OF OPERATING SYSTEM

2 -

1) vehicle acceleration setting

The vehicle acceleration perfor-

mance level can be set in this menu.
The value can be selected from 0.

m/s², 1.5 m/s² and 3.0 m/s² and the

default is 1.5 m/s².

A higher value means better accel-

eration performance.

①

In the Driving setting menu, use

the Up (

) and Down (

) but-

tons to set the cursor to the posi-

tion 1.

②

Press the OK (

) button. Then,

the cursor blinks.

③

Adjust the setting value as desired

with the up ( ) and down ( )

buttons.

④

When pressing the OK (

) but-

ton, the adjusted value is set and

the cursor no longer blinks.

TX1O354E

<Driving setting>

In the setting menu, pressing the

( ) button opens the driving setting

menu.
Pressing the ESC ( ) button re-

turns to the setting menu.

2) Creep speed upper limit setting

The upper speed limit in the creep

speed mode can be set within the

range of 1 to 14 km/h.

The creep speed mode can be se-

lected using the creep speed switch.

①

In the Vehicle control setting

menu, use the Up (

) and

Down (

) buttons to set the

cursor to the position 2.

②

Press the OK (

) button. Then,

the cursor blinks.

③

Adjust the setting value as desired

with the up ( ) and down (

)

buttons.

④

When pressing the OK (

) but-

ton, the adjusted value is set and

the cursor no longer blinks.

TX1500-영문-02(나).indd 44

2012-12-17 오후 2:25:26

Summary of Contents for TX1500



























































































































































































































Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands

TYM TX1500, Manual

Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands