TYM TX1500 Manual Download Page 73

Page: 73 / 218

2 - 1

DESCRIPTION OF OPERATING SYSTEM

(6) Multifunction lever

This lever is used to select between

the forward driving and reverse driv-

ing, activate the cruise control and

adjust the cruise control speed.

< Selecting between forward driv-

ing and reverse driving>

The buttons can be operated

only when the activation but-

ton on the back of the lever is

pressed as a safety measure.
With the activation button on the

•

< Cruise control>

The cruise control is a function

to maintain the set driving speed

without intervention of the driver.
With the activation button on the

back of the lever pressed, press

the cruise control button to set

the current driving speed as the

cruise speed.
Pressing the cruise control but-

ton again or depressing the

brake pedal deactivates the

cruise control.
Once the cruise control is acti-

vated, the cruise control indica-

tor on the instrument cluster is il-

luminated.
When pressing the cruise con-

trol button at a speed over 5 km/h

with the cruise control deactivat-

ed, the cruise control is activated

with the last set speed.

•

TX1O322A

+ button

- button

Cruise control

button

Forward driving

(

↑

) button

Reverse driving

(

↓

) button

Hold button

back of the lever pressed, press

the forward driving (

↑

) button to

select forward driving and press

the reverse driving (

↓

) button to

select reverse driving.
After the forward or reverse driv-

ing is selected, release all the

buttons.
When the driving direction is se-

lected, the forward driving indi-

cator (F) or reverse driving indi-

cator (R) on the instrument clus-

ter is illuminated accordingly.

•

TX1500-영문-02(나).indd 17

2012-12-17 오후 2:24:56

Summary of Contents for TX1500



























































































































































































































Search results

Summary of Contents for TX1500

Reviews:

TYM TX1500, Manual, Page: 73 / 218

Search results

Summary of Contents for TX1500

Reviews: