TYM TX1500 Manual Download Page 17

Page: 17 / 218

FOR SAFE OPERATION

- 1

The tractor may move abruptly

which can cause an accident.

Never try to start the engine by

connecting the start motor terminal

or safety switch directly.

WARNING

When starting the engine in an en-

closed space, ventilate the area by

opening doors or windows.



Do not operate or warm up

(idling) the machine in a poorly

ventilated area.

Make sure that no one is around

the machine before starting the en-

gine. And do not let any person

such as a child get close to the ma-

chine.

In particular, when driving back-

ward, signal to bystanders nearby

by sounding the horn.

Exhaust fumes are poisonous

enough to make you feel dizzy

even to cause brain damage due

to the oxygen deprivation.

If anyone including children get

near the machine, it can cause an

accident.

llo

t F

llo

3. WHEN STARTING ENGINE

TX1500-영문-00(안).indd 13

2012-12-17 오후 2:22:18

Summary of Contents for TX1500



























































































































































































































Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands

TYM TX1500, Manual

Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands