TYM TX1500 Manual Download Page 101

Page: 101 / 218

2 -

DESCRIPTION OF OPERATING SYSTEM

TX1O355E

3) vehicle speed calibration

In this menu, the dynamic tire cir-

cumference can be set in the as-

sembled condition.
The dynamic tire circumference can

be set precisely to enable fine con

trol and provide information.
The dynamic circumference can be

either automatically or manually set.

<Manual setting>

①

Drive the tractor and measure

the distance that the rear wheel

is moved for one turn. This dis-

tance should be measured in

millimeter.

②

In the Vehicle condition set-

ting menu, use the Up ( ) and

Down (

) buttons to move the

cursor to . Vehicle speed cali-

bration.

③

Press the OK (

) button. Then,

the cursor blinks.

④

Use the Up (

) and Down (

)

buttons to switch to MANUAL.

⑤

Press the OK (

) button. Then,

use the (

) button to set the

cursor onto the setting value.

⑥

Press the OK (

) button. Then,

the cursor blinks and you can

adjust the value from the first

digit.

⑦

Adjust the value as desired with

the Up (

) and Down (

) but-

tons.

⑧

After changing the value as de-

sired, press the ( ) button to

move to the next digit.

⑨

Adjust the value as desired with

the Up (

) and Down (

) but-

tons.

⑩

After adjusting the last digit,

press the OK (

) button.

TX1500-영문-02(나).indd 45

2012-12-17 오후 2:25:28

Summary of Contents for TX1500



























































































































































































































Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands

TYM TX1500, Manual

Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands