TYM TX1500 Manual Download Page 6

Page: 6 / 218

FOR SAFE OPERATION

WARNING

■

The warnings listed here describe the important contents for your safety so make sure to read those and follow

them. If ignored, it may cause a fatal accident with injury or death.

■

More detailed information is included in this manual.

1. GENERAL PRECAUTIONS

llo

t F

Do not load flammable, explosive

material (diesel, gasoline, etc) on

the machine.

Do not load anything that hinders

driving.



Keep the vicinity of driver’s seat

clean at all times.

Do not use cellular phone while

driving.



Park the machine in a safe place

before using it.

There is a possibility of fire or ex-

plosion.

Using a cellular phone while driv-

ing can distract your driving result-

ing in an unexpected accident.

You may be subject to an unex-

pected accident because of inter-

vention on the operation of brake,

clutch and acceleration pedal.

DANGER

WARNING

Bang!

TX1500-영문-00(안).indd 2

2012-12-17 오후 2:22:06

Summary of Contents for TX1500



























































































































































































































Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands

TYM TX1500, Manual

Search results

Summary of Contents for TX1500

Reviews:

Related manuals for TX1500

Brands by name

Popular brands