Tuttnauer 2301006, Operation & Maintenance Manual

Page: 47 / 122

Page 42 of 117 pages
Canceling the FAIL message
At the end of an aborted process the FAIL light is turned on and an error message
is displayed on the screen indicating the cause of the failure.
Pressing the STOP key cancels the displayed message and switches off the
FAIL light.
RUN/FAIL LED's
The operation panel contains 2 small LED's are located on the
top left corner. The RUN LED (green) lights when the autoclave
is in process. When the system has been turned off at the
ST.BY keypad, the RUN LED flashes for 1/2 a second for every 2 seconds
showing there is still power entering the system (i.e. the appliance has not been
switched off).
The FAIL LED (red) lights when there is a problem with the system.