TRUST 735S POWERC@M ZOOM
34
After connecting
my camera to my
PC for the first
time, I cannot see
an extra disk drive
in Windows
Explorer.
Windows cannot detect the
driver so quickly.
When the camera is
connected to a Windows
system for the first time, it
can sometimes take longer
than 5 minutes before
Windows has detected and
installed the default drivers.
This is normal. Wait for
some time and refresh the
contents of the open
Windows Explorer window
by pressing F5. A removable
disk will eventually appear in
the list of folders. Only then
has the driver been fully
installed.
My camera is
automatically
detected by
Windows, but the
webcam function
does not work.
The driver for the webcam
function has not been
installed.
A separate driver must be
installed in order to use the
webcam function. This
function is not included in
the function which
recognizes the camera as a
removable disk (Mass
Storage Device, MSD).
If I disconnect my
camera from the
USB port, I receive
a message saying
that it was not
removed correctly.
Why is that and
how should it be
disconnected?
The device was not turned
off in Windows.
Since the camera is a
storage medium, it is
possible that it was being
written to or read by
Windows when it was
disconnected. Abruptly
disconnecting the device
may damage the directory
structure or the memory
layout. The device must,
therefore, be released
before it can be
disconnected from the USB
port.
This is carried out as
follows: an icon is displayed
in the right-hand corner of
the taskbar for
disconnecting hardware
(image of a PC card with a
green arrow). Double-click
on this icon and then select
the device that you wish to
disconnect by clicking on
‘Stop’. You will then receive
a message saying that the
device can be disconnected.
