TRUST 735S POWERC@M ZOOM
31
U K
The photographs
contain a lot of
noise (snow).
The photographs are taken
in dark surroundings.
Make sure there is enough
light.
The photographs were taken
in bright sunlight.
Take photographs in
shadow.
The photograph is
over exposed.
The contrast in the subject is
too great.
Change the lighting or take
the photograph closer by or
further away.
The image on the
LCD screen is too
bright.
There is too much backlight.
Set the exposure to
‘Backlight’ (see chapter
6.2.6).
The image on the
LCD screen is too
dark.
There is insufficient light.
Use an extra light source to
create more light.
Use the flash (see chapter
6.2.4).
The flash cannot
be turned on.
In order to charge the flash,
more power is required than
is contained in the batteries.
The battery power is low.
Replace the batteries will full
batteries (see chapter 5.1).
The flash cannot
be set to ‘Auto’ in
the menu.
The battery power is too
low.
Take a photograph without
using the flash or
replace the batteries.
The photographs
are out of focus.
The focus has been set
incorrectly.
Set the focus correctly (see
chapter 6.2.1).
Less photographs
can be taken than
expected.
The recordings contain a lot
of detail or noise.
In the case of noise, select a
location with more light.
If there is too much detail, it
is normal that less
photographs or video clips
can be taken.
Sound is not
produced.
You are playing a video clip
on the camera.
This is normal. To play the
sound, the file must be
copied to your computer and
played using, for example,
Microsoft Media Player.
‘Strobe is charging’ is
displayed on the LCD
screen.
The flash is being charged.
Wait until the indictor goes
green.
The camera is still busy
saving the previous
photograph. The indicator
flashes red.
Wait until the indicator goes
green.
No photographs or
video clips can be
taken.
The camera is busy
recording a video clip.
Stop recording.
